Below are steps to help you install your Ultron Touchscreen at your club:
What you will need:
Touchscreen Install Guide
Step 1: Open the box and take out all materials. You should have the Ultron touchscreen, HDMI chord, power charger (2 pieces), and touchscreen wall mount in front of you.
Step 2: Connect the power charger to the touchscreen and to the wall outlet near the TV - the touchscreen needs a power 24/7.
Step 3: Connect the Myzone receiver to the touchscreen through the USK port. The receiver should be wall mounted 8-10 feet above the ground with no obstructions.
Step 4: Connect the HDMI chord to the TV and touchscreen.
Step 5: Power on the touchscreen and TV - be sure the TV input channel is set to the correct HDMI port.
Step 6: Once powered on, click on the WIFI icon located in the bottom right hand corner of your screen. Connect to your club WIFI network.
Step 7: Open TeamViewer on your touchscreen's desktop and contact Myzone Technical Support by phone or email firstname.lastname@example.org with your TeamViewer ID# to complete the last step of licensing.