InBody is a scale that uses bioelectrical impedance analysis (BIA) to measure body composition, such as lean body mass and fat mass, to assess your overall health. The results can then be printed and uploaded to your Myzone account under Body Metrics allowing users to spot trend lines and create appr
InBody scales will need to be updated to the latest firmware to generate a QR code on the results sheet. The QR code is then scanned in the Myzone app where results are instantly uploaded.
QR Code Integration – Device Setup
InBody versions: 270, 370S, 570, 770
The InBody device requires to be on a supported version of firmware, please see the table below for device reference.
To check the device firmware revision, enter the Administrator menu on the device, and tap the number as shown below. The full firmware revision will be displayed at the bottom of the menu screen.
If the device does not have a supported version of firmware, please contact your local InBody service agent for further information or to discuss a firmware upgrade.
After ensuring the device firmware is correct, you will need to set the device up to print the QR code on the results sheet. To do this, access the Administrator menu, select option 13. Outputs/Interpretations for Results Sheets, then select InBody Results Sheet.
Within this menu, note the Free Space number. This will tell you how much availability you have on the results sheet. You may have to de-select or edit some options to allow enough space. For the results QR integration, find and select QR Code Output. Once selected, press Save then Exit until you return to the Home screen.
Device Setup for QR Integration – Data Management Package 220.127.116.11
InBody version: 120
If you are using InBody’s data management package on revision 18.104.22.168 or above and printing via the application rather than from the device, you should be able to print the QR irrespective of the InBody device firmware. To check the version of LB120, enter the Setup located at the top right-hand corner of the software, then select 10. Program and Computer Information/Update History.
Within this screen, you can see the program information located towards the top left of the screen. This will need to be program version 22.214.171.124 or greater. If your software does not meet this, then please contact your local representative to obtain an updated version.
To set the program to print QR codes on the results sheets, from the home screen, enter Setup then under the ‘InBody Test Settings’ category, select option 03. Output/Interpretations for Results Sheets.
Within this menu, note the Free Space number as this will tell you how much availability you have on the results sheet. You may have to de-select or swap some options to allow enough space. For the results QR integration, find and select QR Code Output. Once selected, press Save then Exit until you return to the Home screen.
Upload QR Results to Myzone
After you complete the QR integration on your results sheet, you will have the QR code located on the right-hand side after you print your results sheet.
To upload the results into your Myzone profile, open the Myzone App, and select My Body Metrics.
Select the QR icon located at the top of the screen. When selected, the Myzone app will prompt you to use your phone’s camera to scan the QR code found on your InBody results sheet. Select the checkmark after the app has successfully located the QR code.
This information is then stored in your My Body Metrics section.